Here You Can Find An Overview of the Solenoid Coils

Solenoid Coil 22 mm
(Standard Coil, Class F)

This mini coil is for valves with small armature tubes.
This encapsulated device includes the coil as well as an integrated magnetic iron and quick-connect plug. The synthetic encapsulation material is an effective, compact housing and offers full protection against dust, oil, water, etc. It is also easy to install where space is limited and is characterized by shock and corrosion protection. (for coils with 10.8 mm armature tube)

Associated Fastening Element
Fastening parts consisting of plate, washer, and nut
Standard version:
- Plate made of anodized aluminum
- Washer and nut made of passivated steel

Associated Connection Plug
Standard plug for the electrical connection of every 22 mm coil DIN 43650 AB PG 9 2P+T

Solenoid Coil 32 mm
(Standard Coil, IP65, Class F)

This coil can be mounted on most Lucifer valves. Consisting of a solenoid coil and an iron core, which are completely encapsulated in plastic. This casing offers good sealing and effective protection against mechanical influences. Easy installation in confined spaces – protection against impact and corrosion – simple valve conversion for other requirements possible.

Solenoid Coil 32 mm
(High Temperature Coil, IP65, Class H)

Class H for high temperatures or high performance. Encapsulation in synthetic material, connection for plug 2P + E DIN 43650 A, protection class IP65 applies only to the plug. This coil complies with IEC/CENELEC safety standards and the EU Low Voltage Directive 73/23/EC.

Solenoid Coil 32 mm
(Splash-Proof Coil, IP67, Class F)

IP67 Series coil with two 500 mm long, free cable ends (no plug needed). Housing made of synthetic material. This coil complies with IEC/CENELEC safety standards and the EU Low Voltage Directive 73/23/EC. Grounding: Since no grounding cable is supplied, it must be ensured that at least a part of the valve, pipe, or system with the valve must have a ground connection.

Associated Fastening Element
Fastening parts consisting of plate, washer, and nut
Standard version:
- Plate made of anodized aluminum
- Washer and nut made of passivated steel

Associated Connection Plug
Standard plug for the electrical connection of every 32 mm coil
- Item No: 486586 for standard versions
- Item No: 492645 for high-temperature version DIN 43650 AA PG 9 2P+T

Solenoid Coil 37 mm (Solenoid Coil for EX Zones)
(Standard Coil, IP67, Class H)

The copper winding (copper wire insulation of Class H) and the magnetic iron circuit are encased in Class H plastic. The connection box and the cover are made of high-quality plastic, which also corresponds to insulation material Class H.

Associated Fastening Element
Fastening parts consisting of plate, washer, nut, and seals.
The fastening elements of the coil are integrated in the scope of delivery.

Associated Connection Plug
The cable is connected via the cable gland and terminals in the housing.

Solenoid Coil 40 mm
(Standard Coil, IP65, Class F)

The coil winding is completely encapsulated in synthetic material. The electrical connection is made via screw terminals for wire up to 1.5 mm. This coil complies with IEC/CENELEC safety standards and the EU Low Voltage Directive 73/23/EC. This coil must be used with a metal housing.

Associated Housing (50 mm)

Standard Housing
This metal housing offers ideal protection against impact and corrosion – rotatable by 360°. This housing can be used for electrical components of series 481000 and 481044.

Water and Dust Tight Housing Series 8720
This housing is dust and watertight. It complies with the international protection class IP67 according to IEC/EN60529. This corrosion-resistant metal housing provides excellent protection for the coil against impact. It must be equipped with the electrical components of series 481044.