Series: | 612 |
Seal: | FKM |
Series long: | 612KF |
Bore in mm: | 12 |
Bore area in mm²: | 115 |
Advantages: | The use of the locking balls means that an optimum grip of the plug connection is guaranteed, even with forces that are applied laterally. The simple unlocking mechanism, which is optimised by knurling at the end of the sleeve, can be operated by pulling back once on the sleeve. |
Working pressure: | PB = 20 bar, maximum static working pressure with safety factor of 4 to 1. |
Working temperature: | -15°C up to +200°C (FKM) depending on the medium |
Shut-Off: | Quick coupling Straight-Through |
Connection: | Hose barb 45° angled 13mm LW(1/2") |
Connection description: | Hose barb 45° angled 13mm LW(1/2") |
Connection type: | Hose barb |
Material: | Brass nickel plated |
Material description: | Brass CuZn39Pb3 2.0401 (except sleeve) |
Seal description: | Fluororubber |
Surface: | nickel plated |
Material connection: | Brass nickel plated |
Material valve body: | Brass nickel plated |
Material sleeve: | Brass nickel plated |
Material spring snap ring: | stainless steel AISI 301 |
Material balls/pins: | Stainless steel AISI 420 |
Material seal: | Viton® |
Weight in kg: | 0,1677 |
Self-venting coupling: | No |
Safety locking system: | No |
Single-hand operation: | Yes |
Two-hand operation: | No |
Ball locking: | Yes |
Pin lock: | No |
Ultra-FLO-valve: | No |
Vacuum suitable: | Yes |
Water-resistant: | Yes |
Flat-sealing: | No |
Suitable breath / respiratory protection: | No |
Pressure eliminator: | No |
Hydraulics: | No |
Pneumatics: | No |
Standard product: | No |
Mould coupling: | Yes |
All information is intended as a non-binding guideline! We do not assume liability for any data selection not confirmed in writing.