Series: | 608 |
Seal: | Without Seal |
Series long: | 608VN |
Bore in mm: | 8 |
Bore area in mm²: | 50 |
Advantages: | The use of the locking balls means that an optimum grip of the plug connection is guaranteed, even with forces that are applied laterally. The simple unlocking mechanism, which is optimised by knurling at the end of the sleeve, can be operated by pulling back once on the sleeve. |
Working pressure: | PB = 20 bar, maximum static working pressure with safety factor of 4 to 1. |
Working temperature: | -15°C up to +200°C (FKM) depending on the medium |
Shut-Off: | Plug Straight-Through |
Connection: | Male thread 1/4" |
Connection description: | Male pipe thread of Whitworth form ISO 228 1/4" |
Connection type: | Male thread |
Material: | Brass nickel plated |
Material description: | Brass CuZn39Pb3 2.0401 (except sleeve) |
Surface: | nickel plated |
Weight in kg: | 0,0982 |
Self-venting coupling: | No |
Safety locking system: | No |
Single-hand operation: | Yes |
Two-hand operation: | No |
Ball locking: | No |
Pin lock: | No |
Ultra-FLO-valve: | No |
Vacuum suitable: | Yes |
Water-resistant: | Yes |
Flat-sealing: | No |
Suitable breath / respiratory protection: | No |
Pressure eliminator: | No |
Hydraulics: | No |
Pneumatics: | No |
Standard product: | No |
Mould coupling: | Yes |
All information is intended as a non-binding guideline! We do not assume liability for any data selection not confirmed in writing.