Used to regulate the pressure in water circuits; without blowoff valve
Micro-regulator with rolling diaphragm.
Preset pressure stability as the upstream pressure varies.
High flow rates with reduced pressure drops
Quick overpressure exhaust
Micro-regulator with rolling diaphragm.
Preset pressure stability as the upstream pressure varies.
High flow rates with reduced pressure drops
Quick overpressure exhaust
Wall fixing screws: M4 by means of the bracket provided
| Series: | Bit |
| Connection: | Female thread G 1/8" |
| max. inlet pressure: | 13 bar |
| Working pressure: | 0 – 8 bar |
| Mounting position: | In any position |
| Additional information: | The regulator pressure must always be set upwards._x000D_ For increased sensitivity, use a pressure regulator with a rated pressure as close as possible to the required value. |
| Flow rate in l/min: | 600 |
| Seals: | NBR |
| Dome: | Technopolymer |
| Adjustment spring: | Steel |
| Adjustment knob: | Technopolymer |
| Adjusting nut: | Brass Ms58 |
| Adjusting screw: | Brass Ms58 |
| Body: | Technopolymer with threaded sleeve brass Ms58 |
| Nut: | Brass Ms58 |
| Regulator spring: | Steel |
| Regulator case: | Technopolymer |
| Ring nut: | Technopolymer |
| Plug: | Technopolymer |
| Valve spring: | Stainless steel |
| Valve part: | Brass Ms58 vulcanized with NBR |
| Weight in kg: | 0,08 |
All information is intended as a non-binding guideline! We do not assume liability for any data selection not confirmed in writing.
Available downloads:
3D Modell