Micro-regulator with rolling diaphragm.
Preset pressure stability as the upstream pressure varies.
High flow rates with reduced pressure drops
Quick overpressure exhaust
Wall fixing screws: M4 by means of the bracket provided
Series: | Bit |
Connection: | Female thread G 1/8" |
max. inlet pressure: | 13 bar |
Working pressure: | 0 – 2 bar |
Mounting position: | In any position |
Additional information: | The regulator pressure must always be set upwards._x000D_ For increased sensitivity, use a pressure regulator with a rated pressure as close as possible to the required value. |
Flow rate in l/min: | 600 |
Seals: | NBR |
Dome: | Technopolymer |
Adjustment spring: | Steel |
Adjustment knob: | Technopolymer |
Adjusting nut: | Brass Ms58 |
Adjusting screw: | Brass Ms58 |
Body: | Technopolymer with threaded sleeve brass Ms58 |
Nut: | Brass Ms58 |
Regulator spring: | Steel |
Regulator case: | Technopolymer |
Ring nut: | Technopolymer |
Plug: | Technopolymer |
Valve spring: | Stainless steel |
Valve part: | Brass Ms58 vulcanized with NBR |
Weight in kg: | 0,08 |
All information is intended as a non-binding guideline! We do not assume liability for any data selection not confirmed in writing.