Cartridge pressure regulator suitable for assembly block.
Select the pressure regulator according to the desired outlet pressure. The outlet pressure cannot be subsequently adjusted. This safeguards against tampering.
Select the pressure regulator according to the desired outlet pressure. The outlet pressure cannot be subsequently adjusted. This safeguards against tampering.
| Series: | 233 |
| Flow rate in l/min: | 350 |
| Series long: | 233 |
| max. inlet pressure: | 12 bar |
| Outlet pressure: | 2 bar |
| Relieving function: | non-relieving |
| Working temperature: | -20°C up to +60°C |
| Connection: | Male thread G 1/4 |
| Connection description: | Male thread G 1/4 |
| Material: | Brass |
| Seal description: | Nitrite-butadiene rubber |
| Surface: | blank finish |
| Material connection: | Brass |
| Material seal: | NBR |
| Case: | Brass |
| Filter element: | Stainless steel |
| Tappet: | Brass |
| Medium suitability: | compressed air or non-corrosive gases |
| Weight in kg: | 0,02 |
| Hydraulics: | No |
| Pneumatics: | Yes |
| Water-resistant: | No |
All information is intended as a non-binding guideline! We do not assume liability for any data selection not confirmed in writing.
Available downloads:
3D Modell